Once you get to the Settings you’re going to go to the OK button. Scroll down and select the MAINTENANCE. Next, you’re gonna use the button to scroll down to get to MAINTENANCE and press OK. Select the OIL AND FILTER. After that, you can see the OIL and FILTER, so go ahead and press the OK button again. Highlight and select RESET.

How to reset oil and scheduled Maintenance light on combination meter and navigation they are both done at the same time. The New 2022 NX and 2023 Lexus RX.

Corolla Maintenance Required Light Reset. 1.Turn the ignition switch to the “ON” position. 2.Depress the odometer pushbutton until it indicates “Trip A” mileage. 3.Turn ignition Switch to the “ACC” position. 4.Push and hold the Odometer Trip Pushbutton. 5.While holding the Trip Pushbutton depressed, turn the ignition switch to the
Pan through the various service lights until you get to the change oil button. Press the BC button until it says “Reset”. Hold down the BC button a few seconds until it shows the clock which means that you’ve reset the light. The reset mileage and date that that next service is due will show on the screen. To reset the light, first press the red reset button on the right side of your control panel. Hold the button down for up to 10 seconds before releasing it. If the light still flashes, go to step 3. Step 3: Reset Red Light. The power pack or engine may be overloaded, making this red maintenance light come on; then, it blinks after 30 seconds.

1) Turn key to position 2. 2) Press/release the R button to show the next service due light. Release button. 3) Turn key to Off. 4) Press and HOLD the same R button to view the service light, THEN, within 2 seconds, turn key to position 2. 5) Wait up to 10 second and the light will reset to show new service . C.

. 356 399 158 88 348 286 199 343 38

how do you reset the maintenance light